BICYLE ROAD > LOOK 2010: Look 586

Look 586

LOOK HEAD FIT Headset System
This LOOK patented headset design allows for headset and stem adjustment independent of each other.
Headset adjustment is executed via a threaded insert that is installed on the HSC 6 fork’s special steerer
tube. The result is having your headset correctly adjusted even when you need to adjust or swap your
stem. This new LOOK technology saves 40 grams through the elimination of the compression plug.

‘E-POST’ Seatpost with interchangeable elastomers.
1) Anti-rotation: as the E-post is not round, it is always aligned with frame’s centre line.
2) Vibration Dampening: uses replaceable elastomer blocks to help enhance ride comfort.
3) Carbon friendly tightening torque: 5 Newton/meters is enough
4) Three different density (black, red, or grey) elastomer blocks are included with each frame.

ULTRA LIGHT DESIGN - Twenty Years ‘Savoir Faire’
LOOK’s twenty plus years of carbon technology allow us to manufacture a feather weight frame that is
light without compromising the overall rigidity and ride performance. The 586 weighs only 940g with an
uncut seat tube.

SLEEK ONE-PIECE DESIGN
LOOK proprietary technology makes it possible to manufacture single-piece ‘monobloc’ frames that are
attractive and very light.

COMPRESSED FRAME DROPOUTS
The rear dropouts are directly compressed at the time when both the seat and chain stays are
moulded, resulting in a single-piece rear triangle. The frame is lighter while blending optimal
stiffness.

LOOK HSC6 FORK
The 100% carbon single-piece ‘monobloc’ fork weighs only 340g (uncut) and meets the NEW
Standard EN 14781 Requirement (144 joule frontal impact). Using the same technology as the
rear dropouts, the carbon dropouts are compressed at the same time the fork blades, crown and
steerer are moulded. The integrated carbon conical bearing seat (45° race angle) allows for the
direct fitment of the bearing, eliminating the need of an additional aluminum crown race. The
HSC 6 is designed to be used with an 1-1/8’’ upper and 1-1/4’’ lower sealed bearing. The fork
steerer tube is specifically shaped to be used with the new Head Fit headset sytem.